|
It's the most convenient way to get a beautiful finish without the hassles of dust!
|
In addition to what I mention earlier you get these other benefits...
- Quick-Drying
- Low Odor - no ventilation required!
- Protection That Lasts
- Will not change original floor color
|
These two are worth mentioning again.
- Economical - 1/2 the price of sanding.
- Room is ready to use within 24 hours
|
Rx For Wood Floors is the no-sanding way to have your floors professionally refinished and restored to their original beauty.
If you agree that there is nothing more beautiful than wood flooring. Especially when it looks great. However, we know with normal use, the beauty and luster of your floor will eventually be diminished by scuffs, scratches, gouges and an overall dull and worn appearance. But it doesn't have to be that way. Do you have..
Scuffed Floors
Many people thought that the only way to bring the floor back "Before" the development of Rx For Wood Floors, was to suffer though the inconvenience of leaving your home during the sanding and refinishing process, as well as the high cost associated with conventional wood floor refinishing. Not any more! Here's an example of a...
Scratched Floor
Here's How It Works...
With the Rx For Wood system you now have another option. Our award-winning technology allows you to have beautifully refinished floors with no messy sanding, and at about one-half the cost of having them sanded and refinished. Are you sick of ...
Gouged Floors
First, will check for contaminants that would prevent adhesion. For example, if it is determined that there is wax on your wood floor finish, it would need to be removed. Then we begin the three-step finishing process.
Step 1
Rx For Wood Floors no-sanding formula chemically "sands" the floor. Just like sanding, this unique formula abrades the old finish to receive a beautiful new topcoat. It saves the hours, expense and the mess of conventional sanding.
Step 2
Rx For Wood Floors repair products are applied to any necessary repairs to the surface of the floor before applying the final finish.
Step 3
Rx For Wood Floors unique catalyzed wood finish is applied and permanently locks with the original finish for an attractive, clear finish that lasts.
The next day, you'll be enjoying your newly restored floors, and enjoying the satisfaction of having saved lots of money with floors protected by a finish that's as tough and durable as it is beautiful.
Dull & Worn Floor
Amazingly, Rx For Wood Floors is so revolutionary, it eliminates the high cost and time-consuming hassles of sanding and refinishing your wood floors.
Why shouldn't you get your floors the way you want right now? It's simple dial me now and get your floor back to the way you feel they should be. besides in less 24hrs. We can Bring Back That Mirror Shine you deserve.
What Will Happen If You Do Nothing?
You will put up with dull, stratched up wood floors. Your wood will only get worst. And evenually you will have to have it sanded at a higher price. Not to mention the 50% increase it may cost you. Who needs that, when now you have a choice.
Let me not forget the Rx system is safe and won’t hurt your floors in any way. In fact, after the finish dries, it's rock hard and almost bullet proof. So if you have a active family, it’ll withstand the dog, the kids and more. Best of all the finish will last for years.
Lets review. You...
- No longer have to deal with the dust that the sanding method does.
- No mess to clean up for week after the sanding is done.
- Best of all it won’t cost you an arm and a leg either.
For as little as $2.00 per sq. ft. You can bring your floors back to life, even if you feel your floors just need a touch up or want to see what we can do for your floors call now. We have a program that can fit your needs too. Call me now 740-548-7315.
Thanks for viewing my site. By the way below are some tips on how to keep your floor looking good "After you had them freshly refinished.
____________________________________________________________________________
First two weeks
Even though you can move your furniture back in place within 24 hours
For the first three days your floor is still curing, so:
-Be gentle when moving back furniture. -Install proper felt protectors under ALL furniture. -Wait with replacing area rugs. -Avoid using water or any cleaner during this period. -Avoid heavy traffic.
Recommended Floor Maintenance
- Always use floor protectors, such as felt glides.
- Urethane treated floors should never be waxed.
- Floor life will be lengthened by using floor mats or rugs at entry ways, bathroom exits or other high-traffic areas to protect the finish from excessive dirt or moisture.
- Area rugs should not be used for 2-3 weeks after a floor has been installed or refinished. Extra caution should also be taken as floor continues to cure during this time.
- Normal cleaning requires only dry or dust mopping. It is more important to remove any sand or grit before it has a chance to be ground into the floor finish.
- Spills or liquids should be wiped up immediately.
- Never use cleaners containing solvents, as they may damage the floors. Only cleaners specifically made for urethane-treated floors, like Clean and shine by Rx for wood or other cleaners we've tested should be used.
- Ideal humidity level is approximately 40%. If low humidity levels occur during the winter months, the use of an air humidifier is recommended to reduce shrinkage that may occur as the floor material loses moisture. If high humidity persists during summer months, a dehumidifier may be necessary. Wider boards will be more sensitive to high or low humidity levels.
- A hardwood floor should be recoated when the original finish is showing signs of wear, but before it has worn down to the bare wood. The floor will stain easily and may require sanding. Please contact us when the floor shows signs of wear or for any of your hardwood floor needs.
- Floor protectors and cleaners are available at my office (740) 548-7315 or e-mail me chris@dri-kleen.com
Dustless Recoating should be done every two to three years, depending on the wear of your floors original finish begins to show signs of wear, you should call before it has worn down to the bare wood or you will have to have it sanded.
Caring for your floors later:
According to Oak Flooring Institute, "a good rule of thumb is to vacuum or dust weekly." After vacuuming or dusting, use recommended flooring cleaner for spills and general cleanup on floors which have non-waxed polyurethane finish.
Additionally:
- Place mats and throw rugs at doorways, exteriors and interiors to help prevent the tracking of grit, dirt and sand.
- Never wet-mop a wood floor. Water and wood do not mix well together. Use recommended flooring cleaner.
- Wipe up food and other spills immediately with a dry or slightly dampened towel (wipe dry).
- Keep high heels in good repairs. An unprotected tip will dent any hardwood floor.
- Using a humidifier or dehumidifier in conjunction with a furnace or air conditioning system to maintain relative humidity in the home at 30-50% will maintain the moisture in the wood and minimize cracks between the boards
- Put plastic or fabric-faced glides under the legs of furniture to prevent scuffing and scratching.
- Kitchen floors experience the most traffic in a home. Place an area rug in front of the kitchen sink and stove. Shake out or vacuum the rugs frequently.
- When moving heavy furniture, protect wood flooring using professional sliders under the legs they are also available through our office.
- Do not use wax, oil soap, or other household cleaners.
- Finally, when your urethane finish start showing wear patterns from surface scratching you should call. When high traffic area begin to look dull it is time to recoat or restore the finish. Call us for a free friendly evaluation on what should be done. Thanks for visiting. I hope this helped you. Any comments or question should be email to chris@dri-kleen.com. To return to my home page click here
|